Used Cooling Towers

Stock# 49316007

Used RER Model ROT-911MG Cooling Tower. 43 nominal tons; 304 stainless steel construction; Factory certified performance; Makeup water float and valve; Stainless steel fan guard; PVC fill, drift eliminators, and air inlet louver; PVC spray distribution with nozzles; Aluminum alloy hollow airfoil fan. Includes ladder and handrails. Built 2024.

Stock# 47488002

Used Baltimore Aircoil Single Cell Cooling Tower. Open Loop, Approximate 93 Nominal Tons, Model 2412C. Galvanized steel housing, top fan. Serial # 79-1629D. Includes a 1.5 hp Goulds pump.

Stock# 53725001

Used Evapco AT Induced Draft Counterflow Cooling Tower, Model AT 19-214. 279.7 Nominal Tons. 1028 Gallons per minute at 95 degrees F EWT, 85 degrees F LWT, 75 degrees F WB. Single fan driven by 10hp, 3/60/230/460 volt, 1760rpm motor. Bottom basin. Serial# 11-460100. Year 2011.

Stock# 10151516

Used Marley 400 Ton Cooling Tower, Model NC212. Galvanized Steel Induced Draft Cross Flow 15 hp fan drive. Built 1991.

Stock# 53750001

Used Baltimore Aircoil Series 1500 Cooling Tower, Model 15201-2, (2) Cell Unit. Nominal 201 Ton rating each cell, 402 total tons. Nominal flow rate 1206 GPM, maximum flow rate 1992 GPM. 6" Inlets, 8" Outlets. (2) Approximately 15HP Fans. Airflow: Approximately 53,450 CFM (per cell).

Stock# 47344004

Used BAC 2-Cell Cooling Tower, Model 15425-2. Galvanized Steel, built for 1,083 gpm per cell or 361 nominal tons so the hot water distribution basin nozzles were selected for this flow rate. Nominal 425 ton cells or suitable for 1,275 gpm 95F to 85F at 78F w.b. entering air temperature. Includes: bottom equalizer connection, flume box equalizer connections for equalization of the two cold water basins.

Stock# 13147001

Used Baltimore Aircoil 455 Ton Cooling Tower, Model Number 3455A-MM. (2) 8,000 watt heaters. 20 HP totally enclosed fan. 460 Volt. 3 phase. All steel construction. 8? water inlet and outlet. OAD: 245"L x 122"W x 136'H . 1000 GPM. Approx. 15,000 lbs.

Stock# 53642001

Used Lot of (8) Evapco Eco-ATWB 24-4N20 Closed Circuit Cooling Towers. Approximately 600 ton each. Each approximate 2,800 GPM. (2) 40hp fans, approximate 281,190 CFM. Coil volume 5,107 liters (1349 gallon). (2) 40HP fans. Setup as (2) cell units. Seller would like to sell all 8 units at one time, however, will accept offers.

Stock# 51258012

Used SPX Marley NC8409U Crossflow Cooling Tower 790 Ton/Cell | 2018 Build | 4-Cell Industrial System; 12', (5) blade fan; 6,600 gpm for combined all 4 cells/1650 gpm individually; 109.0 F hot water; 85.0 F cold water; 76.0 F entering WB; 50 HP, 1800 RPM, 60/230-460V; Built 2018.

Stock# 53694001

Used BAC Baltimore Air Coil Series 1500 Double Cell Cooling Tower, Model S15E-1212-12KN-2/L. 802 Nominal Tonnage. Based on 95 degrees F entering water temperature to an 85 degrees F leaving water temperature at a 78 degrees F entering wet-bulb temperature. Galvanized panels. (2) 66" diameter Axial Fans. Hinged access door. 316 Stainless Steel Cold water basin. Serial# U211999901-01-1. Built 2021.

Stock# 53694002

Used BAC Baltimore Air Coil Model S15E-1212-12KN-2/L Series 1500 Double Cell Cooling Tower. 802 Nominal Tonnage. Based on 95 degrees F entering water temperature to an 85 degrees F leaving water temperature at a 78 degrees F entering wet-bulb temperature. Galvanized panels. (2) 66" diameter Axial Fans. Hinged access door. 316 Stainless Steel Cold water basin. Serial# U211999901-01-2. Built 2021.

Stock# 51258010

Used SPX Marley Cooling Tower, Model NC8409U. Capable of 417-848 tons output per unit; 753 nominal tons; 6000 GPM design flow per tower; 144" fan diameter with (2) inlets at 10"; Single inlet connection with inlet diameter of 10"; Access door opening 30" W x 48" H; Has Markey drift eliminator; OAD: 13'-10.75"L X 22'-5"W X 14"-2.25"H : 30,129 lbs. design operating weight. Built 2017.

Stock# 51258011

Used SPX Marley NC8409T Cooling Tower 705 Nominal Tons | Built 2015 | Industrial Water Cooling. Capable of 417-848 tons output per unit; 705 nominal tons; 6000 GPM design flow per tower; 144" fan diameter with (2) inlets at 10"; Single inlet connection with inlet diameter of 10"; Access door opening 30" W x 48" H; Has Markey drift eliminator; OAD: 13'-10.75"L X 22'-5"W X 14"-2.25"H : 30,129 lbs. design operating weight. Built 2015.

Stock# 53852001

Used BAC Cooling Tower, Model XES3E-1222-10L-2. Approx.1033 nominal tons; 3100 GPM from 95 degrees F to 85 degrees F at 78 degrees F entering air wet bulb. Stainless steel fan guard; Stainless steel internal walkway; 4' ladder and cage. (2) 15 HP, 3/60/460V fan motors. Built 2018.

Stock# 52749002

Unused Evapco Advanced Technology (AT), Closed Circuit Cooler, Model ATWB 12-7L12. Approximate 2,952 Tons. Unit designed to cool 328 GPM at 113 degrees F entering, 86 degrees leaving, 79 degrees F entering wet bulb. G-235 Hot-dip galvanized steel construction, 304 stainless steel pan strainers. Fan driven by a 25hp motor. Air flow 75,130 CFM, coil volume 701.1 gallon, coil design pressure 300 psi, riser pipe 6" diameter. Approximate 24,000 lbs shipping weight.

Stock# 52749003

Unused- Evapco Advanced Technology (AT) Model ATWB 12-7L12 Closed Circuit Cooler. Approximate 2,952 Tons. Uniat 113 degrees F entering, 86 degrees leaving, 79 degrees F entering wet bulb. G-235 Hot-dip galvanized steel construction, 304 stainless steel pan strainers. Fan driven by a 25hp motor. Air flow 75,130 CFM, coil volume 701.1 gallon, coil design pressure 300 psi, riser pipe 6" diameter. Approximate 24,000 lbs shipping weight.